In The Field: Fascinating Facts About Construction And Contractors

Issues with low water pressure in your home can be frustrating. When this happens, you should know a few ways you can use to boost the water pressure in your home. There are several reasons why you might be having low water pressure in your home, but your solution is in simple plumbing techniques that you can use to improve the pressure of water in your home. Therefore, if you are concerned about the pressure of water in your shower or from your faucets, here are a few tips to help you increase the pressure.

Check Your Water Meter

First, checking your water meter will help you know whether it is functioning at optimal strength capacity. You may want to check your water meter also because it will help you rule you rule out any issues concerning leaks. Before reading the meter, shut off all the water valves and faucets in your home.

You will then be able to confirm the existence or absence of leaks in two major ways. First, check the dial or pointer on the water meter to see whether it moves. If the pointer or dial spins, it means that water is still flowing and that you have a leak. Second, check the reading and wait for a few hours while water is still shut. If after this time you record a different reading, you have a leak.

Inspect and Fix All Leaks

Detecting leaks can be tricky and challenging because very many places could be leaking, including your faucets, valves, toilets, and pipes among others. It would be a great idea to call your plumber to help you find and fix those leaks.

Inspect Your Pressure Regulator

Your pressure regulator is a device that ensures that the water that's flowing through your plumbing system doesn't do so at very high temperatures that can cause damage to your pipes and faucets. However, while a pressure regulator may reduce the pressure of water to a given range, the pressure reduced might be too much, leading to low water pressure issues. This could be the case when the regulator develops a problem. Therefore, make sure that the pressure regulator is checked by a professional and if found to be faulty, replace it.

Take Care of Issues with Your Hot Water Supply System

Sometimes you will realise that your hot water taps are the only fixtures with the pressure problem. In such a case, you have to check for issues with the water heater. One of the possible problems could be clogs caused by sediments. You should flush out the tank or replace your anode rods if this doesn't work. A water softener can also help.

If your water pressure still isn't as you'd like it, contact a local plumber like Murphy Plumbing Pty Ltd.